Powerdrive product family
19
Installation
X
If necessary enlarge the drill hole.
X
Tighten screws (1).
X
Adjust the locking guide (3) so that
the tooth belt neither touches nor has
too much clearance. To do so, loosen 2
screws (4), move the locking guide (3)
and re-tighten the flathead screws (4)
(torque 5 Nm).
The driver must not come into contact with the tooth belt locking mechanism (optional) during operation.
X
After the tooth belt has been installed, check (click) the switching points of the indicator switches of the tooth
belt locking mechanism (optional). Adjust by bending the actuator levers, if necessary.
5.6 Installing cable guides
Cables can be cut!
X
Lay cables in such a way that there are no cables near the moving parts.
Cable guide spacing approx. 200 mm.
X
Fix the cable guide (1) on the track (2).
