Powerdrive product family
10
Installation
5.3.3 Adjustable angled floor guide wall installation (option)
X
Screw the fastening bracket (2) onto the fixed
panel (1) using two screws (6) (tightening
torque 10 Nm).
X
Align the moving leaf (4) and thereby the
adjusting angle (3).
X
Tighten the screw (5).
X
If there is no fixed panel, mount the floor
guide onto the wall using suitable attachment
materials.
1
2
3
4
5
6
5.3.4 Continuous floor guide (option)
à
For assembly of the continuous floor guide, see the “Continuous floor guide” assembly drawing.
à
For further information see the respective installation diagrams, Chapter 4.1.
5.4 Installing the moving leaf
5.4.1 Installing the spacer adapters on the moving leaf
The door suspension plates are installed during glazing of the moving leaves. In case of subsequent installation
of the door suspension plates, the frames of the door moving leaves may have to be dismantled.
X
Observe the installation drawings for the moving leaves.
à
See installation drawing for the moving leaf for the position of the spacer adapters (1).
