Powerdrive product family
16
Installation
5.5 Mounting the drive components
5.5.1 Fitting the tooth belt
X
Cut the tooth belt to length.
X
Place the toothed belt on the motor pulley and deflection pulley.
If there is a toothed belt locking present:
X
Thread the tooth belt into the toothed belt locking.
5.5.2 Fitting the tooth belt to the driver
X
Place the toothed belt locking (1) on the ends
of the tooth belt (3) (3 teeth per belt end).
1-leaf
X
Screw the toothed belt locking (1) to the driver
(2) using the screws (4) (torque 6 Nm).
2-leaf
X
Mount both ends of the tooth belt (3) using
the toothed belt locking (1) on the driver (2)
using screws (4) (torque 6 Nm).
The second toothed belt locking is installed only after adjusting the closing position.
