Hook bolt Lock A
18
Installation
4.3 Installing the transmission element with ECdrive T2
4.3.1 ECdrive T2, 1-leaf, right hand slide to open
X
Adjust the position of the stop buffer in closed position without rubber buffer after door installation and
calibration.
When the door is closed the stop buffer must not be flush. The distance should be about 1 mm.
Installing the spring-mounted unit
X
Screw the spring-mounted unit (1) to the buffer (2).
1
2
Installing the unit without spring-mounting
Summary of Contents for Hook bolt Lock A
