19
Configuration program – wide-range reader GCLR 2000
GCLR-I 2000/GCLR-O 2000
Pos. Area
Explanation
1
General information
Displays the data read out of the GCLR
2
Setting of the switching times
of the outputs and activation
delays
If the field "Permanent" is activated, the output
remains switched following activation by a
transponder until this is reset via the input
OPTO-IN2
3
Managing the transponder list Refer also to Chapter 5.2.2.
Taught transponders are shown on the Trans-
ponder ID (hex) list. For the marked transponder,
you can select on the right
à
which output is to be switched
à
whether the pick-up delay is to be activated
à
or whether the keys are to be activated for the
transponder with keys
