USER INSTRUCTIONS
30
To access the Easy channel localisation mode, start from the normal timed thermostat
operating screen and press the
button key three times. In this way the channels
implemented by the device can be localised to insert them in the various functions
implemented with the Easy configurator (Easy Controller). Use the
or
button key to
select the channels to be localised, then press the
button key to send the bus command
used to localise the selected channel: to confirm that it was sent, the
icon will light up for
a brief period. To exit the Easy channel localisation mode simply press the
button key
again or wait 30 seconds from the last time it was pressed.
MAS (Master)
To be used to send the type (heating/air conditioning) and
HVAC operating mode to the area thermostats operating as
"slaves".
PRx (hourly profiles)
Independent hourly profiles (from 1 to 7), each of which can
control up to 4 values of an independent variable.
Easy channel localisation mode
Summary of Contents for Chorus GW 10 764
Page 2: ......
