Copying the holiday program
In Auto mode, you can copy the profile of the holiday day
onto any day of the week. This function can be activated up to
6 days ahead of the chosen day. It is especially useful when a
holiday day falls during the week.
Press the
and
button keys to copy the profile of the holiday
day: on the display, the
symbol and the bar of the holiday
day
will flash. Use the
or
button key to select the day
of the week onto which you want to copy the profile, then
confirm with the
button key.
During the set day, the
symbol will be lit up with a fixed light.
This function is temporary: at midnight on the selected day, the
unit returns to its programmed weekly profile. If you want to
deactivate the function (or modify the day of the week), press
the
and
button keys then select the holiday day
(or
the new day of the week). Press
to confirm the new setting.
Pages relating to the hourly timer
Viewing the hourly profiles
NOTE: the hourly profiles of the hourly timer are activated and
visible on the display only if their respective channels are
included in a function with the relative actuator channel, while
programming with the Easy controller.
If the visible page relates to an hourly profile, press the
button key to activate (Auto) or deactivate (OFF) the profile. If
an hourly profile is set (using the Easy configurator) to manage
an Easy probe, holding down the
button key temporarily
displays the input data regarding the type of operation, HVAC
mode, active set-point and measured temperature provided by
the device controlled by the profile.
To return to the screen listing the pages that can be viewed,
keep the
button key pressed.
Use the
or
button key to scroll through the sequence. To
confirm a page, press the
button key or wait for the 30-
second time-out period to elapse.
USER INSTRUCTIONS
E
N
G
L
I
S
H
13
Summary of Contents for Chorus GW 10 764
Page 2: ......
