Gewa UP400, User Manual

Page: 20 / 40

20
OPERATING USE
EFFECTS
5.4.2 REVERB
The reverb effect simulates the room sound in different environments. Use the ” Type “
parameter to select the type of the simulated room.
Room 1 sounds like a furnished room
Room 2 simulates a slightly larger room
Stage sounds like a stage
Hall 1 sounds like a small concert hall
Hall 2 sounds like a larger concert hall
Hall 3 sounds like a huge concert hall
The ” volume “ parameter controls the volume of the reverb effect in relation to the dry
sound.
With the parameter ”
duration “ you can adjust the decay time of the simulated reverb.
A longer reverberation time makes the room appear larger.
To return to the sound selection page, press one of the two buttons at the bottom of the
screen. ”Ok“ saves the settings made until you turn off the piano or select another sound.
”cancel“ discards all changes and resets the sound to the previous settings.
5.4.3 MODULATION EFFECTS
The ”Fx“ effect block provides the following modulation effects:
Chorus The chorus effect adds doublings to the original sound, which are
periodically slightly out ot tune. This provides a fuller sound when using
a synthetic sample but can seem unnatural for the sound of acoustic
instruments such as piano.
Tremolo The tremolo effect is a periodic change in the volume of the sound.
Pan Tremolo Pan(orama) tremolo lets you choose the sound to switch between the left
and right speakers.
Phaser The phaser is a periodic shift in the phase of a sound.
Rotary Simulates the sound of a rotary loudspeaker, which was mainly used for
electric organs.
The ” Dry/Wet “ parameter controls the ratio between the dry sound and the effect
component.
The ”
Rate “ parameter sets the speed of the modulation effect.
To return to the sound selection page, press one of the two buttons at the bottom of the
screen. ” Ok “ saves the settings you have made until you switch off the piano or select
another sound. ” Cancel “ discards all changes and resets the sound to the previous
settings.