31
Powersettings / Reset
Automatic Switch off
After the time set here, the piano will turn off
completely. To deactivate the function, press
the left arrow button until “off“ appears.
Start-Up Settings
Controls how the piano starts up: “Factory
Default“ resets the piano each time it is
turned on, so that it starts up with the factory
settings. “Last“ always starts the piano with
the settings that were set when the piano was
turned off.
Factory Settings
“Reset Piano“ sets all settings to the delivery
status.
Piano Informationen
Model
Displays the piano-specific data for
evaluation purposes.
Serial Number
Firmware
Soundbank
MIDI
Output Channel
Sets the midi channel between 1 and 16 on
which the MIDI data of the piano will be sent.
Local Control
When set to ‚‘off‘‘, the values played on the
piano will be sent via the MIDI output, but
not to the internal sound processing engine.
This is useful if you want to play another
instrument or a computer based recording
program with the keyboard of your digial
piano, without actually hearing the sound of
your piano. In the standard setting “on“ the
keyboard is directly connected to the internal
sound processing engine.
Program Change
When set to „on“, a command will be sent
every time the piano sound has changed. So
for example, when recording with a computer
the program change is also recorded or you
can change the sounds of an external tone
generator as well. In the „Off“ setting, these
commands will not be sent.
Piano Mode
When piano mode is on, channels 1 and 2
of incoming MIDI modes are filled with piano
effects (string resonances, etc) when a piano
sound is selected.
OPERATING USE
SETTINGS
Summary of Contents for UP400
Page 39: ......
