10
4. Now place the keyboard (1) onto the base from above. The metal guides of the side
panels have to slide into the respective groove and the counterpart. Make sure that the
angles of the side panels are guided into the millings of the keyboard.
5. Secure the keyboard with 2 screws M6x16 (8A) and 2 screws M6 x 30 (8B).
3. Then attach the rear panel with phillips screws (9A and 9B) at the angle brackets of the
side panels and the pedalboard/subwoofer housing.
6. Now plug the cables for pedal and subwoofer (11 and 12) into the connectors on the
pedalboard and keyboard.
ASSEMBLY INSTRUCTIONS
Summary of Contents for UP400
Page 39: ......