24
OPERATING USE
MUSIC
The “
Pedals
“ button determines whether the current layer should react to the piano pedals
or not. For example, you can set a combination where the right keyboard area contains
a piano that responds normally to the pedals, and the left keyboard area contains a bass
that does not respond to the sustain pedal, so that the notes to not sound in unison.
The “
Delete
“ button deletes the sound assignment for the current layers and resets
all settings to the default. Above the keyboard there are three bars representing the
approximate keyboard range of the layers. The currently selected layer is displayed in
blue.
A volume control is located below the keyboard. This controls the volume of the selected
layer in the overall mix of the combination.
Press “
OK
“ to confirm all changes and return to the combination view.“
Cancel
“ will also
return to the combination view, but the settings made will be discarded.
5.6
MUSIC
By selecting the note icon in the toolbar, you can access the “Music“ section. This is
used to play and record pieces of music. At the top of the screen, there are five icons for
selecting the modes:
USB - Lessons - Demos - Recordings - Recorder. The icon for the page you are currently
viewing is highlighted in blue.
5.6.1
USB
If you have inserted a USB stick with music tracks
into the piano, you select and play them here. The
UP400 plays tracks in *.wav, *.mp3, and *.mid
formats.
In the area below, the title of the current song is
displayed. By tapping this area, you can access
a list view of all available tracks on the connected
USB stick.
A blue bar under the title shows the current
progress of the playback. The already played time
is shown on the left side and the remaining time of
the piece is on the right side. Audio files are shown
in minutes and seconds, , midi files in bar count
and beats.
Below the bar are the usual buttons for playback
controls.
The slider at the bottom of the screen controls the
volume of the track being played. Therefore the
overall volume of your own playing is not affected
by this setting.
Summary of Contents for UP400
Page 39: ......
