background image

 

35

 

Battery Pack 

Your Tablet PC has two battery packs. The battery pack is the internal power 

source for the Tablet PC. It is rechargeable using the AC adapter. 

NOTE: 

Care and maintenance information for the battery is provided in the 

“Battery Pack Guidelines” section in Chapter 7. 

Charging the Battery Pack 

NOTE: 

 

Charging will not start if the battery’s temperature is outside the 
allowed range, which is between 0 

°

C (32 

°

F) and 50 

°

C (122 

°

F). Once 

the battery’s temperature meets the requirements, charging 
automatically resumes. 

 

During charging, do not disconnect the AC adapter before the battery 

has been fully charged; otherwise you will get a prematurely charged 
battery. 

 

The battery has a high temperature protection mechanism which limits 
the maximum charge of the battery to 80% of its total capacity in the 

event of high temperature conditions. In such conditions, the battery 
will be regarded as fully charged at 80% capacity. 

 

The battery level may automatically lessen due to the self-discharge 

process (0.21% per day), even when the battery pack is fully charged 
(100%). This happens no matter if the battery pack is installed in the 

Tablet PC. 

 

To charge the battery pack, connect the AC adapter to the Tablet PC and an 
electrical outlet. The Battery Indicator ( 

 ) on the Tablet PC glows amber to 

indicate that charging is in progress. You are advised to keep the Tablet PC 
power off while the battery is being charged. When the battery is fully 

charged, the Battery Charge Indicator glows green. 

The two battery packs are charged in parallel. It takes approximately 5 hours 
to fully charge the two battery packs when the power is off and approximately 

6 hours when the power is on (may need a longer charging time at lower 
temperatures). 

CAUTION:

 After the Tablet PC has been fully recharged, do not immediately 

disconnect and reconnect the AC adapter to charge it again. Doing so may 
damage the battery. 

Summary of Contents for A140








































































































Reviews: