55
Graphics Setup
DVMT Pre-Allocated
sets the amount of pre-allocated (fixed) graphics
memory for use by the internal graphics device.
Device Configuration
enables or disables several hardware components.
The items available for setting depend on your model.
Security Menu
The Security menu contains the security settings, which safeguard your
system against unauthorized use.
NOTE:
You can set the user password only when the supervisor password has
been set.
If both the supervisor and user passwords are set, you can enter any of
them for starting up the system and/or entering BIOS Setup. However,
the user password only allows you to view/change the settings of certain
items.
A password setting is applied right after it is confirmed. To cancel a
password, leave the password empty by pressing the
Enter
key.
Set Supervisor/User Password
sets the supervisor/user password. You can
set the supervisor/user password to be required for starting up the
system and/or entering BIOS Setup.
Password on Boot
allows you to enable or disable the entering of
password for booting up your system.
Set HDD 0 User Password
sets the password for locking the Primary
Master hard disk drive. After setting a password, the hard disk drive can
only be unlocked by the password no matter where it is installed.
TPM Setup Menu
TPM Support
enables or disables TPM (Trusted Platform Module) support.
TPM (Trusted Platform Module) is a component on your computer’s
mainboard that is specifically designed to enhance platform security by
providing a protected space for key operations and other security critical
tasks.
Change TPM Status
allows you to select between
No Change
and
Clear
.
