background image

 

15

 

Using the Touchscreen 

CAUTION:

 Do not use a sharp object such as a ballpoint pen or pencil on the 

touchscreen. Doing so may damage the touchscreen surface. Use the included 
stylus or your finger.

 

 

NOTE:

 An optical film has been attached to the screen before shipment. The 

film is a consumable, which will be worn out by possible scratches. You can 

purchase a new one when replacement is required. 

 

Your Tablet PC has a capacitive touchscreen. This type of touchscreen 

responds to objects that have conductive properties, such as fingertips and a 
capacitive-tipped stylus. 

You can change the touchscreen sensitivity settings to suit your scenario. 

Double-tap the 

Touch Screen Mode 

shortcut on Windows desktop to open 

the settings menu and select one of the options (as shown below). 

 

 

 

 

 

 

NOTE:

 If liquid is spilled on the touchscreen causing a wet area, the area will 

stop responding to any inputs. For the area to function again, you must dry it. 

 

The following table shows how you use the touchscreen to obtain equivalent 
mouse functions. 

Term/Action 

Equivalent 

Mouse Function 

Tap: 

Touch the screen once. 

Click/Point 

Double-tap: 

Touch the screen twice rapidly. 

Double-click 

Select this if you are using the 
stylus. (You must use the one 
supplied with your model.) 

Select this if you are wearing gloves 
(referring to warm gloves or work gloves, 

not referring to touchscreen-capable gloves). 

Select this if you prefer using 
fingertips. Also, select this 
when raindrops are falling  
on the screen and should be 

rejected as input. 

Summary of Contents for A140








































































































Reviews: