Getac A140 User Manual Download Page 101

Page: 101 / 103

ENERGY STAR 6.1

ENERGY STAR

is a government program that offers businesses and consumers

energy-efficient solutions, making it easy to save money while protecting the

environment for future generations.

Please reference ENERGY STAR

related information

from

As an ENERGY STAR

Partner, Getac Technology Corporation has determined

that this product meets the ENERGY STAR

guidelines for energy efficiency.

An ENERGY STAR

qualified computer uses 70 % less electricity than computers

without enabled power management features.

Earning the

NERGY

TAR



When every home office is powered by equipment that has earned the

ENERGY STAR

, the change will keep over 289 billion pounds of

greenhouse gases out of the air.



If left inactive, ENERGY STAR

qualified computers enter a low-power

mode and may use 15 watts or less. New chip technologies make power
management features more reliable, dependable, and user-friendly than

even just a few years ago.



Spending a large portion of time in low-power mode not only saves

energy, but helps equipment run cooler and last longer.



Businesses that use ENERGY STAR

enabled office equipment may realize

additional savings on air conditioning and maintenance.

Summary of Contents for A140








































































































Search results

Summary of Contents for A140

Reviews:

Related manuals for A140

Brands by name

Popular brands

Getac A140, User Manual

Search results

Summary of Contents for A140

Reviews:

Related manuals for A140

Brands by name

Popular brands