39
LED Power is flashing slowly.
Fault:
The power supply unit is overloaded! The power supply unit may have been misused for
supplying power to other components.
Remedy:
Check the load of the power supply unit. Use the power supply unit only for the voltage
supply of the busbased equipment.
Cut off power supply and restart system.
Fault:
The power supply unit is defective.
Remedy:
Replace power supply unit.
System malfunction 4
System malfunctions
– continued –
LED is flashing slowly
Disposal
Decommissioning
Dismantle the equipment and separate the waste materials, using the material specification as a
reference.
Electronic components (circuit boards) must be disposed of separately.
For the disposal of the equipment observe the pertinent legal regulations concerning waste disposal.
Danger
The equipment is live during operation.
This presents the danger of electric shock!
Cut off power supply before mounting or removing the terminal strips and the housing
cover.
Note on the Declaration of Conformity / Declaration by the Manufacturer
Annex
For details on the conformity of our equipment according to the European Directives see our
Declaration of Conformity or our Declaration of Manufacturer.
The current Declaration of Conformity / Declaration of Manufacturer are available in the Internet under
www.gestra./de/documents or can be requested from us.
1
2
3
4
Test
P
1
2
3
E
4
MAX
MIN
W
X
W
+
-
GESTRA
NRR 2-40
Summary of Contents for NRR 2-40
