GESTRA LRR 1-52, Original Installation & Operating Manual

Page: 59 / 72

59 LRR 1-52, LRR 1-53, URB 55 - USA - Installation & Operating Manual -
850703-00
Configuring the conductivity controller
Calibrating the conductivity electrode
Open the menu .
Brief description of parameters:
Damping *
This parameter is used to settle the
oscillations of the input signal.
* Controller software version
311178.13 or later
Correction factor C,
see page 59
During operation, the indicated
conductivity may differ from the
reference reading obtained from a
reference measurement, e.g., due
to dirt deposits.
When the correction factor is en-
tered, the display is adapted to the
current conductivity reading.
Measuring range (dependent on
controller),
see page 59
Enter the measuring range for your
particular conductivity controller.
Temperature compensation
On/Off
Set temperature coefficient
Proceed in the same way as when
setting correction factor C.
LRR 1-52 (example)