Gestetner DSm651, Network Manual

Page: 109 / 156

Remote Maintenance by telnet
103
4
channel frequency
“
channel no. ”
You can enable or
disable the WEP
function. To enable
the WEP function,
specify [on]; to dis-
able it, specify
[off].
To start the WEP
function, enter the
correct WEP key.
enc [on|off] You can enable or
disable the WEP
function. To enable
the WEP function,
specify [on]; to dis-
able it, specify
[off].
To start the WEP
function, enter the
correct WEP key.
Parameter Value configured
key [ “ key value ” ]
val [1|2|3|4]
You can specify
the WEP key when
entering in hexa-
decimal.
With a 64-bit WEP,
you can use 10 dig-
it hexadecimals.
With a 128-bit
WEP, you can use
26 digit hexadeci-
mals.
Up to four WEP
keys can be regis-
tered. Specify the
number to be reg-
istered with “val”.
When a WEP is
specified by key,
the WEP specified
by key phrase is
overwritten.
To use this func-
tion, set the same
key number and
WEP key for all
ports that transmit
data to each other.
You can omit the
numbers with
“val”. The key
number is set to 1
when making
these omissions.
Parameter Value configured