P.17
P.16
Before first use
•
To remove any residue from the oven that may have been left from the manufacturing process,
you should select the fan oven function and set the thermostat to its maximum temperature
setting.
•
It is perfectly normal for a smell to be produced during this process.
•
You should make sure that any windows in the room are left open during this process.
•
It is advisable for you not to remain in the room whilst the burning off process is taking place.
•
You should leave the oven on maximum setting for 30 – 40 minutes.
•
After the oven cavity has cooled, it should then be cleaned with warm soapy water, using either a
sponge or soft cloth. No abrasive cleaners should be used.
•
Outer parts of the oven should be cleaned with warm soapy water, using either a sponge or soft
cloth. No abrasive cleaners should be used.
•
We would recommend that an appropriate stainless steel cleaner and polish is regularly used on
the stainless steel surfaces of this appliance.
Self-Test Mode
After your appliance is connected to your mains supply for the first time, the display shows “AUTO
” and
00:00 flashing.
1. Press
and
to light up all icons. The buzzer will sound. Release the buttons, the buzzer will
stop beeping and the display will show “
12:30
” ;
2. Or press
and
at the same time, the display shows
. The buzzer will not sound.
Release the buttons and the display shows “
12:30
” ;
3. Or press
and
at the same time, the buzzer will not sound. When the buttons are released,
the display shows “
12:30
” ;
4. or press
and
at the same time to exit the self-test mode, “AUTO” and 00:00 flash, the
decimal point is always on;
5. If the above self-test combination keys are not pressed within 5 seconds after power-on, the
oven will automatically enter the standby state, the display shows the clock and “AUTO” , and the
decimal point is always on.
Operating Instructions
Selecting Manual Operation Mode
•
After your appliance is connected to your mains supply for the first time, the numbers on the timer
display will flash. Before you can select a cooking function or set a temperature, you must set the
appliance into manual operation mode.
•
To select manual operation mode, press the manual operation button
on the control panel.
•
Then, the display shows that
, the clock time and the decimal point are on.
Setting Clock Time
1.
After exiting the self-test mode, you may press
to set the time of day. The decimal flashes and
lights up.
2. Use the minus button and plus button
and
to adjust the time that appears in the display
(numbers will change quickly if you keep pressing). After getting the display to the correct time,
release the buttons and wait for 5 seconds, the time will fix in the display, and you will be able to
use your oven.
3. Then, the display shows that
, the clock time and the decimal point are on.
Note: Adjustment can only be made when no cooking program is in progress.
Setting the Cooking Duration
1. Turn the function selector knob and the temperature control knob to set the fuction and
temperature that you require.
2. Press
to set the duration of the cooking that you require. “AUTO”
will flash.
3. Set the period of the duration function to countdown for, by using the minus and plus buttons
and
. Once the display has got to your desired countdown time, let go of the minus and
plus buttons and wait for 5 seconds. You can set the duration time from 1 minute to 10 hours.
4. The countdown will start immediately and the word “AUTO” will appear on the timer display.
5. During cooking, you can press
or
to check the remaining time, “AUTO”
will flash and you
can shorten or lengthen the time by using the minus or plus buttons
and
. Wait for 5
seconds to fix the time.
6. An alarm will sound when the countdown time has elapsed. The word “AUTO”
will flash and the
heating symbol
will disappear.
Operating Instructions
