Gericom Hollywood D470W, User Manual

Page: 136 / 180

Optional Modules
7 - 2 Wireless LAN & Bluetooth Modules
7
Wireless LAN & Bluetooth Modules
If your purchase includes the optional 802.11b Wireless LAN module and/or
Bluetooth module, make sure you install the supplied device driver(s) for it/
them as indicated in the following pages ( only install the drivers for the op-
tional modules you have purchased ). You will need to turn the module(s) on
by using the ON/OFF switch at the front of the computer.
If you have both the Wireless LAN and Bluetooth modules in your com-
puter, you can use the key combination Fn + F12 to toggle the power to the
modules. The power status of the module will be indicated by the Mail LED
indicator . If you have installed the Auto Mail program, and mail is incom-
ing, then the mail notification warning will be shown (see “LED Power &
Communication Indicators” on page 2 - 6 ).
If you have both wireless modules , turning the ON/OFF switch on will
turn on one of the Wireless modules. Use the Fn + F12 key combination to
toggle power to the other, or both, modules (see “LED Power & Communi-
cation Indicators” on page 2 - 6 for the power status).
If you have one wireless module it will be auto-detected, and you do not need
to use the Fn + F12 key combination.
Communication
Conflict
Do not try to use the
802.11b Wireless LAN
module and the Blue-
tooth module at the
same time, as this may
cause a communica-
tion conflict.
Wireless Device
Operation Aboard
Aircraft
The use of any porta-
ble electronic trans-
mission devices
aboard aircraft is usu-
ally prohibited.
Make
sure the modules are
OFF if you are using
the computer aboard
aircraft
.