Gericom GTV3203, Operating Instructions Manual

Page: 16 / 18

11
11
15
XVI. The PIP function under Analog RGB(PC)/DTV(YPbPr) input status
Press MENU button.
Press P+ or P- button to select PIP menu, the
image (w) will appear on the screen, then press
MENU button to confirm.
Press P+or P- button to select the item. Select PIP
ON/OFF item, then press V+ or V- button to select
PIP ON.
Press EXIT button to exit the menu.
PIP ON/OFF PIP off PIP on PIP off
(The PIP shortcut button on the remote controller has
the same function.)
PIP SOURCE TV AV Scart AV1 AV2
S-Video TV
AUDIO SOURCE MAIN PIP MAIN
PIP POSITION
XVII STILL control
XVIII. MUTE control
Press the STILL button on the remote controller, the current image becomes still . Press the STILL button
again or wait 20 seconds, the still image will be released.
Press the MUTE button on the remote controller, the unit becomes mute .
Press the MUTE button again, the sound can be restored.
PIP
P I P O N / O F F
P I P S O U R C E
A U D I O
P I P P O S I T I O N
S O U R C E
P I P o f f
T V
P I P
XIX. Troubleshooting
If there is any abnormal situation during the operation, please make the corresponding check according to the
following instruction before sending it for repair.
No raster
Interference of the image
and sound
Check the connection of the power cord.
Check if the power switch is On .
Check if the unit is under stand-by status.
Check if the signal source has normal output under the current play status.
Pull off the power plug and switch on after 2 minutes.
Check the direction, location and connection of the antenna.
Check if the signal is interfered under the current play status .
Check if there is any interference by the electric apparatus nearby .
Check if the power of the unit and the signal source is stable .
Check if the grounding of the signal cable is good .
Check if any of the buildings nearby reflects the radio wave.
(Power indicator is red)
The intensities of TV signals in different areas are different. If the image of TV program received through RF
is not clear, please use AV OUT or S-VIDEO OUT on SET-TOP BOX to receive it.
MENU UP DOWN EXIT