Gerber Sabre Engraver Option, Manual

Page: 6 / 29

Welcome 1
Welcome
Thank you for purchasing the Engraver Option for your Sabre

router. This
option provides higher quality engraving than can be achieved by using a
standard router motor or the high frequency spindle.
About this booklet
This booklet contains a list of the kit contents and instructions for unpacking,
assembling, installing, using, and maintaining the Engraver Option. The booklet
also provides a section on engraving basics, such as material and tool selection,
and types of engraving operations.
In order to prepare and engrave a job, you should be familiar with ART Path

and the Sabre operating controls and control pad.
Special information in this booklet is presented in notes, cautions, and warnings
as follows:
„
Note: A note contains important information which could affect successful
completion of a task.
„
CAUTION: A caution statement contains information which, if not
observed, could result in damage to the equipment.
„
WARNING: A warning statement contains information which, if not
observed, could result in personal injury.
Getting help
If you have questions regarding the installation or use of the Engraver Option,
please contact the Gerber Router Support Group at:
860-528-1028
860-290-5568 (fax)