Instructions for Use
CPET
page 88
Version: 4 | Release date: 01 April 2022
Setting
Function
Y-Axis
Parameter selection for the regression calculation
Change direction
Selection field for the regression line(s).
The following is available for selection:
•
None: Only a straight line
•
Both: 2nd straight flatter or steeper
•
Upwards: 2nd straight line must be steeper
•
Downwards: 2nd straight line must be
flatter
Calc. start
Calculation start of the regression as absolute value
or relative to the maximum value
Calc. end
Calculation end of the regression as absolute value
or relative to the maximum value
Change min x
Minimum position of the change, if 2nd straight line
calculated
Change max x
Maximum position of the change, if 2nd straight line
calculated
Calculation limits
When activated, the LL and UL cursors are
displayed.
Show for Line 1 -
Offset
Show offset to regression line 1
Show for Line 1 -
Inclination
Show inclination to regression line 1
