Target Mini Fixed Rugged Dome
4
7. Remove the waterproof cap from the cable opening and thread the
power and / or network cable(s) through the opening.
Figure 4-7
8.
Install the supplied waterproof rubber set onto the cable(s). The
rubber set has two parts. According to the below situation, replace
Part 1 if necessary.
For users of PoE with a Cat.5 Ethernet cable, stay with Part 1a
on the camera body.
For users of PoE with a Cat.6 Ethernet cable, change Part 1a to
the supplied Waterproof rubber set (1b).
For users of DC 12V, change Part 1a to the supplied Waterproof
rubber set (1c).
2
For adapter wire
For Ethernet cable
For Cat.5 Ethernet
cable (PoE)
For Cat.6 Ethernet
cable (PoE)
1a
1b
1c
Figure 4-8
55
