11. Only for GV-EDR2700 series, insert a memory card.
Figure 4-14
12. Secure the camera to the back plate by tightening the three screws as
shown in Step 4.
13. Access the live view. For details, see
7.2 Accessing the Live View
.
14. Adjust image clarity using the GV-IP Device Utility program. For
details, see
7.3 Adjusting Image Clarity
.
15. Loosen the tile screw and pan screw, adjust the angles based on the
live view as needed, and tighten the screws again.
Figure
4-15
16. Attach the silica gel bag to the place indicated below, and secure the
housing cover using the torx wrench.
58
