Video Capture Cards
1
Connecting Slave Card to Master Card
•
The card attached to the lower PCI slot number will act as Master, and the card
attached to the higher PCI slot number will act as Slave.
•
Connect both cards’ inner pins with the 6-Pin Cable. See
(A)
connection in the Figure
below.
•
In a computer where two GV-2008 Cards are installed, only 8 channels are functional
when the GV-System is running. It may be that the position of Master card and Slave
card is reversed, so the 6-Pin Cable is connected to the wrong pin assignment. To
solve the problem, please try to connect both cards’ outer pins with the 6-Pin Cable.
See
(B)
connection in the Figure below.
Master Card
Slave Card
Inner
Outer
(A) 6-Pin Cable
Outer
Inner
(B) 6-Pin Cable
Figure 1-3 Connecting the slave card to the master card
5
Summary of Contents for GV-650
