GeoVision GV-650, Installation Manual

Page: 46 / 116

Hardware Accessories
2
Connections
•
Connect D-type cables and the GV-Video Capture Card to the GV-Loop Through Card
as illustrated below.
•
For the connection to the GV-2004 and GV-2008 Card, the supplied Ribbon Cable
splits at one end with four 10-pin headers. Plug the corresponding cable headers into
the connectors of GV-2004 or GV-2008 Card by the numbers marked on the headers
and connectors. For instance, when connecting to two GV-2008 Cards, connect the
headers “(1-4) 1” and “(5-8) 1” to video inputs 1-4 and 5-8 of the Master GV-2008 Card.
And then connect the headers “(1-4) 2” and “(5-8) 2” to the video inputs of the Slave
GV-2008 Card.
Video out 1~8
(Loop out)
Video out 9~16
(Loop out)
40-Pin
Ribbon Cable
4
GV-Loop Through Card 1
2
3
9-16 D-Type
Video Cable
1-8 D-Type
Video Cable
GV Video Capture Card
Figure 2-6 GV-Loop Through Card connections
43