manualshive.com logo in svg

GeoVision GV-650, Installation Manual

Share
Download
GeoVision GV-650 Installation Manual Download Page 92

 

3.1  Before You Start 

For optimal performance of your system, it is important to follow these recommendations 

before installing the system software: 

•

  It is strongly recommended to divide your hard disk into two partitions. One partition is 

for installing Windows OS and System Software, and the other for storing audio/video 

files and system logs. 

•

  When formatting hard disk, select 

NTFS

 as the file system on both logical drives.   

•

  GV-System is a multi-channel video recording system. With normal use of the system, 

the logical drives containing video files will become fragmented. This is because GV-

System constantly stores video files of multi channels simultaneously, and video files 

will be scattered all over the drives. It is 

not necessary 

to regularly perform disk 

defragmentation. Since the system software and video files are stored on two 

separated logical drives, the performance of your system will not be affected. 

 

 

90 

Summary of Contents for GV-650





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands