Troubleshooting
A message “Can’t find new xxx Module:1, Address:1, in Com1”
appears.
1. Check the RS-485 or USB connection between the GV-System and the GV I/O device.
2. Check whether the power adapter is properly attached to the GV I/O device.
3. Check whether the Port and Address settings on the I/O Devices tab in the System
Configure dialog box are correct.
A message “No PTZ Device Installed” or “Default PTZ Device not
Activate” appears.
1. Make sure the
Activate
option is enabled in Main System. See Step 4, “PTZ Control
Panel”, Chapter 1,
User’s Manual
on the Surveillance System Software CD.
2. If multiple PTZ cameras are installed, make sure to activate each PTZ camera
individually.
How can I find more help?
1. Visit our website at
http://www.geovision.com.tw/english/4_1.asp
2. Write us at
113
Summary of Contents for GV-650
