186
3.10 System
This section allows you to set the camera time and update the firmware.
3.10.1 Time
You can use the following methods to adjust the system time of your camera.
Time
Figure 3-74
1.
Select a
Sync Mode
.
◼
Sync with System Configuration
: Select a Time Zone, manually set a time by
clicking on the System Time, or synchronize with the computer time.
◼
Sync with NTP Server
: To synchronize with a network time server, type the IP
address of the network time server next to
NTP Server Address
and specify the
Update Interval.
◼
Sync with Management Server (ONVIF)
: The device time is synchronized with
Management Server (ONVIF).
◼
Sync with Latest Server Time
: The device time is synchronized with the latest
updated time, either on ONVIF or the Web interface.
2.
Select a
Time Zone
.
3.
Next to
System Time
, manually set the
camera’s time or click
Sync with Computer
Time
to synchronize with the time of your PC.
4.
Click
Save
.
Summary of Contents for CV-ADR2702
Page 161: ...148 Figure 3 36 ...
