118
PPPoE:
The network environment is xDSL connection. Type the Username and
Password provided by ISP to establish the connection. If you use the xDSL
connection with dynamic IP addresses, first use the DDNS function to obtain a
domain name lin
king to the camera’s changing IP address.
DHCP:
The network environment has a DHCP server which will automatically assign
a dynamic IP address to the camera. You can look up the current IP address using
GV-IP Device Utility.
◼
IPv6:
Type the camera’s
IPv6 Address
and
Default Gateway
. Optionally change the
Prefix Length
according to your network settings.
◼
MTU:
Type the Maximum Transfer Unit (MTU). The default value is
1500.
◼
Operating Mode:
Select a mode to control the bandwidth.
Note
:
1.
IPv6 is currently unsupported.
2.
You can also configure
Network
under
Common
for GV-BLFC5800, EBD4700 / 8711,
EBFC5800, TBL2705 / 4700 / 4710 / 8804, and TDR 2700 / 2704 / 8805.
3.2.2 DNS
Ty
pe the camera’s
Preferred DNS Server
and
Alternate DNS Server
.
Figure 3-5
Summary of Contents for CV-ADR2702
Page 161: ...148 Figure 3 36 ...
