B. Gohl
©2009 Satellite AV, LLC
18
1.
- Select Satellite
2.
- Accept or Enter a Start Frequency
3.
- Accept or enter an End Frequency
4.
- Accept or enter a Start Symbol Rate
5.
- Accept or enter an End Symbol Rate
6.
- Accept or change Polarization
7.
- Accept or change Search Speed
7.
- Set NIT network search On/Off
8.
- Press BLUE button to Scan
9.
- When Prompted “ Do you want to save?”
Select Yes
- Press OK to save
- Press EXIT to view channels
I-5. Motor Setting
A DiSEqC / USALS motor can be controlled for reception
of multiple satellites with a single dish and LNBF.
Highlight Motor Setting. Press OK. If requested, enter
Password (default 0000).
1.
Satellite Name
- Press OK to display list of satellites
- Select the proper LNB Type. Press OK
2.
Motor Setup
- Press navigation right arrow and select:
- Disable: No motor movement
- USALS: Automatic calculated
movement based on Longitude /
Latitude position
- DiSEqC 1.2: Manual motor setting
USALS - Select active transponder for the selected
satellite (reference www.lyngsat.com)
- Enter local Longitude (West: North America)
- Enter local Latitude (North: North America)
or
DiSEqC - Select active transponder for the selected
1.2
satellite. (reference www.lyngsat.com)
- Press navigation left/right arrow to move
dish to correct satellite position
- Save position
Summary of Contents for DSR-R100 Series
Page 1: ......
Page 10: ...B Gohl 2009 Satellite AV LLC Remote Control Unit...
