GEOSATpro DSR-R100 Series, Owner'S Manual

Page: 30 / 33

B. Gohl
©2009 Satellite AV, LLC
28
Once the correct satellite is located, make small adjustments in
elevation and azimuth until maximum signal is indicated on the
quality bar. Signal Quality readings should be 50% or better to insure
optimum picture and sound on the receiver. The higher the quality,
the better the reception. If the Signal Quality reading is low, the
picture will break up into little squares and the sound will become
garbled, out of sync, choppy or will disappear completely!
Slightly rotate the LNBF while observing the Signal
Quality reading. Peak for maximum Signal Quality
The LNBF can be slightly positioned in the clamp
towards or away from the reflector to optimize the
satellite quality readings. Start with the LNBF slid
away from the reflector
LNBF Skew - Rotation
LNBF Position Adjustment