FOUR ASHES MACHINERY LTD
www.georipper.co.uk
2
DISCLAIMER
Four Ashes Machinery Ltd makes no representations or warranties with respect to this manual and, to the maximum
extent permitted by law, expressly limits its liability for breach of any warranty that may be implied to the
replacement of this manual with another. Furthermore, Four Ashes Machinery Ltd reserves the right to revise this
publication at any time without incurring an obligation to notify any person of the revision.
The information provided in this documentation contains general descriptions and/or technical characteristics of the
performance of the products contained herein. This documentation is not intended as a substitute for and is not to
be used for determining suitability or reliability of these products for specific user applications. It is the duty of any
such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products
with respect to the relevant specific application or use thereof. Neither Four Ashes Machinery Ltd nor any of its
affiliates or subsidiaries shall be responsible or liable for misuse of the information that is contained herein. If you
have any suggestions for improvements or amendments or have found errors in this publication, please notify us.
All pertinent state, regional, and local safety regulations must be observed when installing and using this product.
For reasons of safety and to help ensure compliance with documented system data, only the manufacturer shall
perform repairs to components.
When devices are used for applications with technical safety requirements, the relevant instructions must be
followed.
Failure to observe this information can result in injury or equipment damage.
Copyright © 2019 by Four Ashes Machinery Ltd
All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any form or by any
means, including photocopying, recording, or other electronic or mechanical methods, without the prior written
permission of the publisher. For permission requests, write to the publisher at the address below.
Four Ashes Machinery Ltd, Four Ashes, Ashwicke Road, Marshfield SN14 8AD, United Kingdom
Tel: +44 1225 891158, www.georipper.co.uk
TRADEMARKS
Four Ashes Machinery Ltd has made every effort to supply trademark information about company names, products
and services mentioned in this manual. Trademarks shown below were derived from various sources. All trademarks
are the property of their respective owners.
General Notice: Some product names used in this manual are used for identification purposes only and may be
trademarks of their respective companies.
