FOUR ASHES MACHINERY LTD
www.georipper.co.uk
19
4
Assembly Instructions
4.1
Assembly of the GeoRipper® Mini Trencher
Read the entire notice carefully before starting the assembly and make sure to have sufficient space to do so. Ensure
that all the items are present and correct and if anything is missing from your box please contact Four Ashes
Machinery Ltd. by emailing [email protected]
4.1.1
Content
Inside your GeoRipper® box you will find the following:
1.
GeoRipper® unit
2.
Trenching bar
3.
Two chains
4.
Spare drive belt and idle nose bearing
5.
Tools including 18mm combination spanner and machine universal tool (model dependent)
4.1.2
Assemble the GeoRipper® bar and chain
It is important to mount the chain in the correct direction. The chain is directional and
will wear prematurely if mounted incorrectly!
Do not over-tension the chain and leave a minimum of 1” or 25mm slack at mid-point.
Wear gloves when handling the chain
Fig.6
1.
Remove the two bolts, spring washers and retaining plate (Fig.6)
