www.geolink.io
4
OpenTracker 2.4
User Manual (1.4.0)
Introduction
The OpenTracker v2 is the first 100% Arduino compatible, fully open source, commercial grade
GPS/GLONASS vehicle tracker development board that comes with a free web interface for tracking.
The OpenTracker v2 hardware includes the same powerful 32-bit ARM controller as the Arduino DUE, a
GSM/GPRS modem for wireless connectivity, a GPS/GLONASS module with Assisted-GPS, CAN-BUS,
plenty of I/O, and a wide operating temperature range of -35°C to +80°C.
The hardware is pre-programmed and able to send tracking data right out of the box; you will only need the
SIM card and to register the device on our on-line tracking software.
After the configuration is complete, you will see your device on the map.
