CAUTION:
Dust on the unit, its parts, and filters from usage should be handled in a safe
manner in accordance with the manufacturer’s safety data information.
Visor Overlay (optional) Replacement
Install a new set of visor overlays by adhering to the main visor using the adhesive
strips provided.
Visor Assembly Replacement
•
Replace the old or damaged visor assembly as shown in Fig. 8 below.
•
Release nuts and push screws inwards, release the front tab
and lift visor from the helmet
•
Fit replacement visor ensuring
slot in visor locates on tab and
bottom edge in grooves, secure
with screws and nuts
•
Fit visor stiffener wire. Insert the
wire ends into the outer slots
provided and rotate to engage
securely in the center slot
Visors should be stored out of
direct sunlight and replaced at
least every 5 years.
Fig. 8
SERVICING
10
