Gentex PUREFLO PURELITE XSTREAM User Manual Download Page 6

This product is NOT APPROVED BY NIOSH.

The PureLite XStream has been assessed under Article 10 and 11B assessments 
conducted by: British Standards Institution, Maylands Avenue, Hemel Hempstead, Herts, 
HP2 4SQ, UK. (Notified Body Number: 0086) 

Respiratory Protection

 

BS EN 12941 1999, respiratory devices, powered filtering devices class TH2P. 
For use against solid particulates only.
The above assessments DO NOT indicate NIOSH approval.
 
Product assessed against the requirements of the following standards:

Respiratory Protection

NOT APPROVED BY NIOSH for use against 
solid particulates only

Eye Protection

ANSI/ISEA Z87.1-2015 personal eye and 
face protection – Meets high Impact 
requirements (Z87+)

Head Protection

Not ANSI approved

 

The PureLite XStream must be used strictly in accordance with these instructions

 

Do not use the PureLite XStream for protection against unknown atmospheric 
contaminants or when concentrations of contaminants are unknown or immediately 
dangerous to life or health, or in atmospheres likely to be deficient in oxygen

 

Do not use the PureLite XStream where there is a requirement for Industrial Hard 
Hat Protection

 

Only use the PureLite XStream with the parts and accessories listed in these 
instructions

APPROVAL FOR USE

SUITABILITY FOR USE

2

Summary of Contents for PUREFLO PURELITE XSTREAM

























Reviews: