![background image](http://html1.mh-extra.com/html/genius/ipcam-secure300w-v-1-0/ipcam-secure300w-v-1-0_user-manual_2212936085.webp)
IPCam SECURE300W User’s Manual
KYE Systems Corp. 84
match the PC/Notebook wireless channel and SSID for direct
communication.
Under infrastructure mode make sure the SSID on the PC/Notebook
and the IPCam SECURE300W must match with the access point’s
SSID.
Q:
Why does the IPCam SECURE300W work locally but not
externally?
A1:
Might be caused from the firewall protection. Need to check the
Internet firewall with your system administrator.
A2:
The default router setting might be a possible reason. Need to
double check if the configuration of the default router settings is
required.
Q:
Why does a series of broad vertical white line appears through
out the image?
A:
A likely issue is that the CMOS sensor becomes overloaded when
the light source is too bright such as direct exposure to sunlight or
halogen light. You need to reposition the IPCam SECURE300W
into a more shaded area immediately as this will damage the CMOS
sensor.
Q:
There is bad focus on the IPCam SECURE300W, what should be
done?
A1:
The focus might not be correctly adjusted for the line of sight.
You need to adjust the IPCam SECURE300W focus manually as
described in Adjust Internet Camera Focus.