Genius IPCAM SECURE300W - V 1.0, User Manual, Page: 16 / 107

IPCam SECURE300W User’s Manual
KYE Systems Corp. 15
Connecting the Camera behind a Router
„ Step 1: Hardware Installation
Follow the “Hardware Installation” section to setup the IPCam
SECURE300W itself.
„ Step 2: Look up the IP address you have with your
computer while connecting to the Internet.
For configuring the IPCam SECURRE300W, you will to
assign the IP Address which is correspondent to the networking
settings.
The “ipconfig” command can be used to look up the IP address
of connecting to the Internet.
Start a DOS window:
Start
Æ Program Æ Accessories Æ Command Prompt Æ Type
Æ
ipconfig
Æ
Press “Enter”
You will see the networking settings.