IPCam SECURE300W User’s Manual
KYE Systems Corp. 40
Dynamic Address (DHCP)
–
If your network uses the
DHCP server, select this option. According to this
setting, the camera will be assigned an IP address from
the DHCP server automatically. Every time when the
camera starts up, please make sure that the DHCP server
is set to assign a static IP address to your camera.
PPPoE
–
If your application requires a direct connection
from an ADSL modem through the camera’s RJ-45 LAN
port, click this option and enter the User ID and
Password into the respective boxes. (
You should have an
ISP PPPoE account.
) The camera will get an IP address
from the ISP as starting up.
•
DNS IP Address:
DNS (Domain Name System) server
is an Internet service that translates domain names into IP
addresses. Enter at least one DNS IP Address in this
field.
•
Dynamic DNS:
Dynamic DNS (Domain Name Service) is a method of
keeping a domain name linked to a changing (dynamic)
IP address. With most Cable and DSL connections, you
are assigned a dynamic IP address and that address is
used only for the duration of that specific connection.
With the IPCam SECURE300W, you can set up your
DDNS service and the IPCam SECURE300W will
automatically update your DDNS server every time it
receives a different IP address. Depending on the service,
this update may take a few hours. If you are using a
DDNS connection, click the
Enable
button and enter in
your User Name, Password, and Domain Name.
Second HTTP Port
: The default port for communication
is via port 80, and you can change it according to your