IPCam SECURE300W User’s Manual
KYE Systems Corp. 17
Therefore, you have to change the computer networking
settings to correspond to the IPCam SECURE300W.
Start
Æ
Program
Æ
Control Panel
Æ
Network
Æ
Right click on
“Network”
Æ
Double click on “TCP/IP”
Æ
Type the IP
Address of 192.168.0.X(you can use any value between 1 to
254, except 20)
Æ
Type the Subnet Mask: 255.255.255.0
Æ
Click on “Save” and then exit.
Step 5: Configure the IPCam SECURE300W
Open the Internet Browser
Æ
Type the IP Address of
192.168.0.20
Æ
Click on “System Administration” to configure
the IPCam SECURE300W.
For more information about the configuration, please refer to
the “Web Configureaiotn Utility”
Note:
If your router has UPnP function, I will suggestion you to
enable the UPnP function of the IPCam SECURE300W. After
enabling the UPnP function, you can link to the IPCam
SECURE300W directly from “My Networking Places”.