1.
Insert the plastic c-ring as shown and place it
over the lens rubber focus ring.
2.
Insert the gear of EEF60-F on the plastic c-ring
until it reaches the flange of the plastic c-ring.
1
Please follow the instructions below to mount the dedicated focus gear on the lens.
3.
Mount the alignment ring onto the lens by
screwing it into the thread on the front of the
lens.
4.
To remove the EEF60-F gear, reverse the above
steps.
5.
The tightness between the EEF60-F gear and the
lens can be adjusted by removing or adding
rubber grips on either sides of the plastic c-ring,
spare rubber grips are included in the package.
