![background image](http://html1.mh-extra.com/html/genius/g3000-link/g3000-link_manual_2212696004.webp)
ENGLISH
Genius Car Alarm
www.geniuscaralarm.com
17
Genius Car Alarms
www.alarmasgenius.com
4
Impact Sensor - Dual Zone
The impact sensor is designed to detect sudden movements in the vehicle (Shock), impacts, tow
car movements, breaking windows. It can also be triggered by extreme noises, thunder or heavy
traffic. NO impact sensor will be activate by wind or oscillating movements. If the sensor detects a
slight bump impact, the siren will sound 5 times, the lights will give 2 flashes. If the sensor detects
excessive shock impact, the siren will sound and the lights will flash for 60 seconds.
The sensitivity level is set by the installer and must be in optimum sensitivity; excessive sensitivity
can cause false alarms
Armed and impact sensor bypass
In the case when it is parked in places of many vibration as close to freeways or areas of
construction, the impact sensor will be activated automatically. Press the opening button and within
3 seconds press the closing button, the light blinks once and the siren will do chirps indicating the
cancellation of the sensor of impact and the system will remain armed. Press the unlock button and
there is cancelled the function to deactivate the sensor.
Rearmed Automatic
This function is programmed into the alarm system memory as a preventive function, if it is
necessary when you disarm the alarm system by remote control and has not entered the vehicle
and have not passed switch ignition to the ON position, board LED indicator will start flashing
rapidly after 90 seconds, the alarm system is armed again confirming with 1 siren sound and 1
flash of lights, again protecting the vehicle
By disabling the alarm system and no door is opened or the ignition key is not passed to ON, after
90 seconds the alarm system is armed in automatic form and close the locks.
Door lock by pressing the brake pedal
Passing the ignition key to On, and all doors are closed, pressing and releasing the brake pedal,
the doors lock automatically. While driving and a door is open, the doors are locked on automatic
after having closed the door and press and release the brake pedal
Passing the ignition key to the OFF position, the locks on the doors unlock immediately
Anti hijack by Ignition
This function is in the memory software to activate anti hijack automatically every time you turn the
ignition switch from the OFF position to the ON position without opening a door. When passing the
ignition switch to the ON position, the LED on the board will start flashing, vehicle lights give 2
flashes
Anti hijack by Doors.
With the ignition swiche in the ON position, you open and close the door a LED on the board will
flash, the lights give 2 flashes indicating the activation of Anti-hijack
Activated Anti hijack
As soon as the alarm system from going to anti-hijack vehicle lights give 2 flashes, the board LED
will start flashing slowly, after 30 seconds the LED will begin to flash and the siren to sound
intermittently, after 30 seconds after the siren started intermittently activates the motor cut off the
vehicle engine and lock the doors, fixed the siren sounds.
Disarmed
/ Deactivated - Anti hijack
To Deactivate the anti-hijack before it starts to run the siren 6 tones or before 60 seconds after
anti-hijack activated, press and release the reset button one time.
To Disarm the anti-hijack after starting to run the siren 6 tones or after 60 seconds after activated,
keep or pass switch ignition to the ON position, press the reset button as many times as directed
the security code (factory default is 1) and wait 3 seconds until confirmation that the code entered
is correct.