ENGLISH
Genius Car Alarm
www.geniuscaralarm.com
22
Genius Car Alarms
www.alarmasgenius.com
9
Connector 1 of 6 Cables
Black
/
White
Positive input of the pedal of the brake
White
Positive input Ignition (Acc). (+15)
Blue
Line of Push buttons of Doors (Negative)
Brown
Push button of the Trunk (Negative)
Orange
Push button of the Hood (Negative)
Green
/
White
Input emergency Lights (Positive)
Connector 2 of 6 Cables
White / Red
Negative output For the Horn
Gray
Positive output for the Siren
Red
Input of Positive Current (+30)
Black
Negative Current input (Chassis)
Yellow
Negative output of 250 mA for the Cut Engine
White
Positive output for the lights Blink
Connector 3 of 8 Cables
Purple
Negative output of 30 seconds for module windows up
Green
Lock Doors (-)
Blue
Unlock Doors (-)
Blue / white
Input (-) Unlock switch
Green / White
Input (-) Lock switch
Orange
Input (+) Light OEM (when lock and unlock by remote)
White
Input (+) Lock For Arming
Pink
Input (+) Unlock for Disarming
Blue connector of 2 cables
LED of the board
Red connector of 2 Cables
Button reset (Valet)
Side connector of 3 pines
Connector for optional sensors of 3 pines, Volumetric Sensor, Etc.
Side connector of 4 Pines
Connector For optional sensors of 2 zone, Microway, Etc.
Side connector of 5 Pines
Interface for module GSM
Adjustment of the sensibility of the sensor of impact
The adjustment of the sensibility of the sensor of impact in sense of the manacles of the clock.
More sensitivity Clockwise, Counterclockwise lower sensitivity
.
Configuration cables OEM (Arming / Disarming)
Mode B: This mode uses up to 4 cables for locking the vehicle doors, to determine the status of the
system. Two cables (PINK WHITE for lock and unlocking are connected to the driver's door).
When the doors are locked with factory original transmitter, the system will arm. When the doors
are unlocked with factory original transmitter, the system is disarmed. The wire GREEN / WHITE
(for the lock button) and cable BLUE / WHITE (for the unlock button) should be connected to one
of the wires from the button lock / unlock the driver's door. These cables are important because
they stop the system from arming / disarming when the door is locked or unlocked manually
