ENGLISH
Genius Car Alarm
www.geniuscaralarm.com
19
Genius Car Alarms
www.alarmasgenius.com
6
Disarmig the reset button
In case the remote control gets lost, is damaged or the battery becomes exhausted him, you will be
able to disarm the system using the button reset.
First. With the armed system, open the door of the driver, the siren will begin to sound.
Second, the ignition switch goes on to the ON position, before 10 seconds there presses the button
reset the quantity of times assigned in the safety code ( factory is
1
) the siren will keep on
sounding in 3 seconds and if the safety code is correct the system disarms itself.
Panic Function
This system can locate the car in a parking lot or send a SOS sign in case of emergency. The
button of closed padlock presses 2 times in a space of 3 seconds, the siren will sound and lights
will ignite during 30 seconds. Pressing any button the function is cancelled.
Enter to the functions programming
To enter the programming mode through the ignition key to the ON position, press the valet button
7 times in a maximum period of 10 seconds, the LED will flash 2 times every second. Pass the key
to OFF and press the valet the number of times a set function, the siren will emit 1 beep every time
you press the valet button, switch the ignition key to ON to enable or disable the function, the siren
will 1 beep to ON and 2 OFF sounds, move the ignition key to OFF, if you want to program another
function, press the valet how many times as space the programmed function and the following
function.
To exit the programming function, press the function button 15 times or wait 10 seconds
PROGRAMMABLE FUNCTION TABLE
NO. FUNCTION
BUTTON I
BUTTON II
1 Valet Mode
ON
OFF ( D F )
2 To detect lights OEM
ON
OFF ( D F )
3 Output Time of the siren and horn
ON = FLASHING
SIGNAL
OFF = CONSTANT ( D F )
4 Selection of flash of lights
ON ( D F )
OFF
5 Arm and Disarm with sound
ON ( D F )
OFF
6 warning of door opened on driven
ON ( D F )
OFF
7 Function Panic
ON ( D F )
OFF
8 Armed with siren and lights
1 CHIRP + 1 FLASH (DF) 2 CHIRP + 2 FLASH
9 Disarmed with siren and lights
1 CHIRP + 1 FLASH 2 CHIRP + 2 FLASH (DF)
10 Automatic Arming
ON
OFF ( D F )
11 Lock with Automatic Arming
ON
OFF ( D F )
12 Anti hijack by door
ON
OFF ( D F )
13 Anti hijack by ignition
ON
OFF ( D F )
14 Factory Reset
ON
Function 1 – Valet Mode
Enables or disables the reset button to place the alarm system in valet mode.
Function 2 – Detect lights OEM
When program function 2 ON, the alarm system can only be armed and disarmed by the pulse of
door locks in conjunction with the notice issued by the vehicle light when closed and open the locks
with the original remote control OEM. The Thin White wire, input sensor must be connected to the
lights but NOT be connected to the white wire of the blinker thick alarm lights.
Function 3
–
Output Time for siren and horn
The positive output for the electronic siren (Gray cable) and the negative output (White / Red
cable) they will be able to be selected like a constant or intermittent output.
