Genius ColorPage-Vivid 4, User Manual

Page: 4 / 34

Genius ColorPage-Vivid 4 USB Scanner
2
How to Use This Guide
T
his User’s Guide provides instructions and illustrations on how to install and operate your
scanner. This guide assumes the user is familiar with the Microsoft Windows XP / Me / 2000 / 98.
If this is not the case, we suggest you learn more about Microsoft Windows by referring to your
Microsoft Windows manual before using your scanner.
The Introduction section of this manual describes the box contents and minimum computer
requirements to use this scanner. Before you start installing your Genius ColorPage–Vivid 4 USB,
please check the box contents to make sure all parts are included. If any items are missing,
please contact the vendor where you purchased your scanner or the Genius Service Center directly
at one of the locations listed on the last page of this manual.
Chapter I , Setting Up Your New Genius ColorPage-Vivid 4 USB Scanner, describes how to install
scanner’s programs and connect the scanner to your computer.
Note: The ColorPage-Vivid 4 USB scanner connect to your computer through the Universal
Serial Bus (USB). If your computer does not support USB technology, you will need to
purchase a USB interface card to add USB capabilities to your computer.
Chapter II describes how to test, maintain and clean your scanner. It also describes how to use
the Scanner Utility Program which helps you troubleshoot and fix connection problems which may
have occurred during the scanner installation.
Chapter III contains some basic descriptions on how to use your scanner. More detailed
descriptions can be found by using the Help function in the relevant scanner programs.
Appendix A contains Genius’s limited warranty agreement and FCC statement concerning the
product.
Conventions of this Guide
Bold —
Important note or first use of an important term in a chapter.
ALL CAPS —
Represents commands or contents on your computer screen.