Genie Z-51/30J, Service And Repair Manual

Page: 92 / 144

82 Z®-51/
31J
Part No. 1268553GT
October 2020 Service and Repair Manual
Deutz TD 2.2 L3 Engine Fault Codes
1406 4766 3 DOC intake temperature voltage
above normal or shorted to high.
1407 4766 4 DOC intake temperature voltage
below normal or shorted to low.
1408 4766 2 DOC intake temperature does not
change.
142 520256 9 Timeout of EAT control receive
message. CAN message is not
received.
144 523211 9 Timeout error of CAN receive frame
EBC1.
154 523212 9 Timeout error of CAN receive frame
engine protection.
1540 520254 8 The stand still regeneration mode
time exceeds the long limit threshold.
1541 520255 2 Hoses connected to the dp DPF
SENT sensor inverted. Swap hoses.
155 523741 14 Engine shutdown request via CAN.
DTC SPN FMI Description
1587 97 0 Water in fuel level prefilter; maximum
value exceeded
188 523240 9 Timeout CAN message function
mode control.
219 520253 2 Rolling counter fault CAN message
EAT Control.
220 4206 2 Fault check for Rolling Counter of
TSC1AE.
221 4206 2 Fault check for Rolling Counter of
TSC1AR.
222 4206 2 Fault check for Rolling Counter of
TSC1TE.
223 4206 2 Fault check for Rolling Counter of
TSC1TR.
349 3349 0 Timeout error of CAN receive frame
active TSC1AE.
350 3349 0 Timeout error of CAN receive frame
passive TSC1AE.
DTC = Diagnostic Trouble Code
FMI = Failure Mode Identifier
SPN = Suspect Parameter Number
351 3349 0 Timeout error of CAN receive frame
active TSC1AR.
352 3349 0 Timeout error of CAN receive frame
passive TSC1AR.
353 3349 0 Timeout error of CAN receive frame
TSC1TE active.
354 3349 0 TSC1 receive timeout error. Short
circuit to ground error.
355 3349 0 Timeout error of CAN receive frame
TSC1TR.
356 3349 0 Passive timeout error of CAN receive
frame TSC1TR.
361 3349 0 Timeout error of CAN receive frame
TSC1AE. Traction Control.
363 3349 0 Timeout error of CAN receive frame
TSC1AR. Retarder.
365 3349 0 Timeout error of CAN receive frame
TSC1TE. Setpoint.
DTC SPN FMI Description
367 3349 0 Timeout Error of CAN receive frame
TSC1TR; control signal.
38 1485 3 ECM main relay voltage above
normal or shorted to high.
39 1485 3 ECM main relay voltage above
normal or shorted to high of actuator
relay 2.
40 1485 3 ECM main relay voltage above
normal or shorted to high of actuator
relay 3.
41 1485 4 ECM main relay voltage below
normal or shorted to low.
42 1485 4 ECM main relay voltage below
normal or shorted to low of actuator
relay 2.
43 1485 4 ECM main relay voltage below
normal or shorted to low of actuator
relay 3.
48 168 0 Battery voltage above normal
operational range.
49 168 1 B a t t e r y v o l t a g e l o w n o r m a l
operational range.