Genie Z-51/30J, Service And Repair Manual

Page: 17 / 144

October 2020
Part No. 1268553GT Z®-51/ 31J 7
Service and Repair Manual
Deutz TD 2.2 L3 Engine
Displacement 134 cu. in
2,2 liters
Number of cylinders
3
Bore and Stroke
3.6 x 4.3 inches
92 x 110 mm
Horsepower net intermittent
@ 2600 rpm
49 hp
36 kW
Induction system
turbocharged
Firing order
1 - 2 - 3
Low idle, standby
1000 rpm
Low idle, function enable 1500 rpm
High idle 2500 rpm
Governor electronic
Lubrication system Low ash oil required
Oil pressure, hot (@ 2000 rpm) 40 to 60 psi
2,8 to 4,1 bar
Oil capacity (including filter) 8 quarts
7,6 liters
Oil viscosity requirements
-22° F to 86° F/ -30° C to 30° C 5W-30
(synthetic)
-4°F to 104°F / -20°C to 40°C 10W-40
Above 5°F / -15°C 15W-40
Unit ships with 15W-40. Extreme operating
temperatures may require the use of alternative
engine oils. For oil requirements, refer to the Engine
Operator Manual for your engine.
Oil temperature switch
Installation torque 8 - 18 ft-lbs
11 - 24 Nm
Temperature switch point 257°F
125°C
Oil pressure switch
Installation torque 8 - 18 ft-lbs
11 - 24 Nm
Pressure switch point 17.4 psi
1,2 bar
Fuel requirement
For fuel requirements, refer to the engine
Operator's Manual for your engine.
Engine coolant capacity 2.5 gallons
9,5 liters
Unit ships with Ethylene Glycol engine coolant.
Consult your local supplier for compatibility before
mixing alternative engine coolants.
Starter motor
Current draw, normal load 140 - 200A
Cranking speed 250 - 350 rpm
Battery – Engine starting and control system
Type 12V DC, Group 31
Quantity
1
Battery capacity, maximum 1000A
Reserve capacity @ 25A rate 200 Minutes
Alternator output 95A @ 14V DC
Specifications