Genie SX-150, Operator'S Manual

Page: 59 / 77

Second Edition • Third Printing Operator's Manual
Operating Instructions
Part No. 1262335 SX-150 • SX-180 57
Operating Envelope Indicator Lights
The operating envelope indicator lights will come
on to notify the operator that a function has been
interrupted and/or an action is required by the
operator.
Raise/Retract Boom indicator
light flashing: Raise/retract the
boom until the indicator light
is off.
Lower Boom indicator light
flashing: Lower the boom until
the indicator light is off.
Machine Not Level indicator
light flashing: The tilt alarm will
be sounding when this light is
flashing. Move the machine to
a firm, level surface.
If the tilt alarm sounds with
the platform uphill:
1 Lower the boom.
2 Retract the boom.
If the tilt alarm sounds with
the platform downhill:
1 Retract the boom.
2 Lower the boom.
Platform Not Level indicator
light flashing: The tilt alarm
will be sounding when this
light is flashing. The Platform
Level toggle switch will only
work in the direction that will
level the platform. Level the
platform until the indicator
light is off.
Platform Level Recovery
1 Press down the foot switch.
2 Push and hold the platform level recovery
switch up.
3 Move the platform level switch in the desired
direction.
Note: The platform level switch will only work in the
direction that will return the platform to a level
position.
Note: From +/-10 degrees of platform level up to
+/-14.9 degrees the platform can still be recovered
from the ground controls or by using the platform
level recovery toggle switch in the procedure
above. Once the platform level reaches
+/-15 degrees the only way to recover is to use the
Service/Recovery key switch on the side of the
ground controls to activate Recovery Mode.